Sunday, July 26, 2020

Chicagoland CNW ATS Retired

The Intermittent inductive automatic train stop system in service on two former Chicago Northwestern commuter lines was taken out of service on October 19th, 2019.  UP/Metra received FRA permission to abandon the system due it being generally rendered unnecessary through the deployment of PTC.   Known for its distinctive "upside-down canoe" track mounted inductors, the IIATS system was developed by General Railway Signal in the 1920's and at its peak covered thousands of miles of main line track with the New York Central, Southern and Santa Fe being the most prominent users with the system supporting high speed operation after the ICC 80mph regulation came into effect in 1948.

ATS inductors partly hidden in the snow below Metra UP-Northwest Line Signal 48.
 Although the Central and Southern dropped the system in the 1970's, the Chicago Northwestern installed ATS on the North line to Kenosha in 1952 and the Northwest line to Harvard in 1967.  The system provides a in cab alert if the train passes a signal displaying an indication other than Clear, which the engineer must acknowledge.  Although the system is no longer is service, removing the inductors has not been a priority and there was likely no alterations made to any signal logic as the greatest operational impact of ATS is the pickup shoe mounted to the leading truck of the locomotive or cab car.  The ATS shoe must be properly gauged to prevent false activation or damage as well as tested like any other technical safety system.  The immediate result of the October 2019 retirement was the removal of equipment mounted ATS shoes with the track mounted inductors slated for removal over time.


This means that there is still a window of time for fans to get out there and document the trackside component of the ATS system as installed by the CNW, especially on the Northwest line with its three track arrangement on the UP Harvard Sub.  At this point ATS is still in service on portions the former Santa Fe "Chief" transcontinental route between Chicago and LA, the Surfliner route between Fullerton and San Diego and the New Jersey Transit RiverLINE where it functions as a positive stop enforcement device at interlockings.  Currently UP is undergoing a dispute with METRA over operation of the former CNW commuter routes with UP looking to offload responsibility.  As the North and Northwest lines see minimal freight traffic, an outright sale to METRA could keep the inductors in place for many years to come.  The Southwest Chief route in New Mexico, Colorado and Kansas has the ATS system "out of service" for over a decade, but the equipment left in place due to general disinvestment in the line.

ATS inductors at CY tower in Chicago.
Left unresolved is the fate of the CNW Automatic Train Control two aspect cab signal system.  Although targeted for retirement by PTC, continuous cab signal systems have proven to be a more reliable form of wayside to train communication and the FRA is still generally in favor of ATC as a PTC supplement.  Union Pacific with its extensive network of traditionally cab signaled track, may look to convert the CNW system or keep it in place as the differences can be ultimately handled in software.

3 comments:

  1. Hi Jersey Mike.
    You may be interested to know that the UP cuts out the ATC on the former C&NW West (Main) Line out of Chicago when the PTC is working. For that matter the UP also cuts out their Cab Signals on the line further west of Omaha too when PTC is working. The only time those two systems are cut in is if PTC is not working for some reason.

    ReplyDelete
  2. In case anyone is interested, the PTC rule I noted above is in their latest System Special Instructions as follows:

    Item 10-B Positive Train Control (PTC) Operations

    8. PTC, ACS, ATC and ATS Operations

    PTC must be the system utilized by the engineer. Upon successful initialization of PTC all subsequent systems (ACS, ATC, and ATS) must be Cut Out. If at any time PTC disengages, is Cut Out under the Train Dispatcher's authority or otherwise fails, the train must be stopped and the secondary system cut back in prior to any further movement.

    ReplyDelete
    Replies
    1. That's strange they are looking to scrap the ACS, as NS is expanding cab signal territory because it reduces the need for intermediate radio bases because that task is taken over by the cab signals.

      I knew the ATS and ATC were targeted for elimination as they are non-standard, but cab signaling independent of PTC has been gaining in popularity.

      Delete