Portland MAX Signaling Primer

In the 1980's and 90's North America's light rail renaissance didn't just save money over traditional urban metro systems by embracing street running and low level boarding. At the time, the signaling standard for "heavy" metros involved full CTC and cab signaled ATC, which came with both high infrastructural and operational costs. However light rail systems got a pass to re-write the rule book and adopt signaling practices that hankered back to the low cost interurbans of old with single direction operation and limited use of interlockings. While I have previously covered two examples of these low cost signaling practices in Denver and Dallas, I recently had the chance to explore a third in Portland Oregon.

Beginning operations in 1988 and seeing significant expansion in the 90's and 2000's, Portland's MAX light rail has the typical mix of downtown street running and dedicated suburban rights of way with operating speeds up to 55mph. The signaling of choice is single direction 3-aspect Automatic Block signaling using US&S transit type signal heads. There is little formal distinction between interlocking and intermediate signals each signal is the same in having a line-prefixed number plate.

One quirk of the system is the setup of having an ABS exit signal at each station and another ABS signal between stations. When a station platform s within a block, the signal will at best display yellow Approach so there is a distinct rhythm of exiting a platform on a Clear then entering the next on Approach. Intermediate signals on the main line away from stations are often of the high mast variety with earlier installations using US&S N type mono-block heads.

A key feature of the MAX train control system is the use of fixed inductive Automatic Train Stop (ATS). Unlike some other systems, MAX actually includes a bit of overlap to get trains stopped before they hit something. This is made possible by an LRV's enhanced braking performance necessary to handle the challenges of street running. Apparently MAX also has a few ATS based speed control timers that function independently of fixed signals, but are indicated by wayside signs.

Interlockings are limited to major junctions, yards and a few select crossovers. These are supplemented by hand operated temporary block stations. As I said before, both ABS and Interlocking signals are largely the same except for the possibility for route indications on the interlocking signals. This can range from the use of a single lamp in the "call-on" position, or separate heads, each governing a specific route. The wayside signals are supplemented by switch position indicators of the US&S ES-20 variety.